JDB7901 silicone adhesive sealant-Shenzhen Jiaduobao Technology Co., Ltd

Products

construction

Home >> Products >> Single component silicone... >> construction

JDB7901 silicone adhesive sealant

JDB7901 is a solvent free, corrosion-free single component silicone adhesive sealant. When placed in humid air and cured at room temperature, it does not drip, has continuity of adhesion, and has excellent adhesion to various substrates. After curing, it will become a flexible silicone rubber.

Feedback

Feature

● Absorbs moisture from the air and solidifies at room temperature, making it easy to use;

● Fast curing speed, suitable for conventional bonding operations;

● Extremely excellent moisture and heat resistance at 85 ℃ × 85% RH × Excellent performance under 1000h damp heat test;

● It has long-term adhesive properties for commonly used materials such as aluminum, PPO, Tedlar backboard, etc. And it has excellent flexibility, moisture-proof and shockproof functions, preventing water vapor, environmental erosion, as well as mechanical, thermal shock, UV light and other damage;

● Excellent ozone, UV, weather and aging resistance, suitable for use at -45 ℃ to 200 ℃.

Parameter

項目		典型值	測試标準
固化前性能 ( 23±2℃/50±5%RH )
外觀	--	白色、灰色、黑色膏狀物		目測
表幹時間	min	≤30		GB/T 13477.5-2002
比重	g/cm³	1.35±0.2		GB/T 13477.2-2002
擠出速率	g/second	≥20		0.5MPa,内徑￠3.0mm
固化後性能 ( 23±2℃/50±5%RH×7days )
硬度	Shore A	37±2		GB/T 531.1—2008
斷裂伸長率	%	680		GB/T 528—2009
拉伸強度	MPa	2.5		GB/T 528—2009
撕裂強度	kN/m	15		GB/T 7124—2009
介電強度	kV/mm	20		GB/T 1408.1—2006
介電常數	--	≤3.5		GB/T 1409—2006
體積電阻率	Ω·cm	≥1.0×10¹⁴		GB/T 1410—2006
介質損耗(50Hz)	--	≤0.1		GB/T 1409—2006
工作溫度	℃	-55～200		--

性能粘接（for 7days at 25±3℃/50±5%RH）

application

● Bonding, sealing, and fixing of optoelectronic components;

● Bonding and sealing of electronic components, instruments, and machinery;

● Bonding and sealing of car fog lights, headlights, etc;

●Sealing of various lighting fixtures.

Usage method

Instructions for use

● Clean and dry the surface of the adhesive object, and remove any pollutants such as rust, dust, and oil that may affect adhesion.

● Extrude the adhesive with a special tool and apply it to the cleaned joint surface.

● Under the condition of 23 ± 2 ℃/50 ± 5% humidity, the surface should dry within 20 minutes and cure for about 2 mm of adhesive thickness for 48 hours. Low temperature and dry climate conditions require an extension of curing time.

matters needing attention

● Before use, please refer to the MSDS in detail.

● The construction site must maintain good air flow.

● Wear protective equipment such as goggles, specialized gloves, shoes, and hats.

● Avoid contact with skin and eyes. If accidentally touching the skin, wipe it clean with a dry towel and wash it thoroughly with soap; If you accidentally come into contact with your eyes, immediately rinse with clean water, and if necessary, go to the hospital for examination.

● After use, the rubber hose of this product should be sealed for storage and reuse. This product is for industrial use only.

Packaging specifications

● 310ml/tube, 24 tubes per box.

● 2600ml/bottle, 4 bottles per box.

Storage and transportation

● Store away from children.

● When stored unopened at or below 28 ° C, the product has a shelf life of 6 months from the date of production.

● This product is non hazardous and is stored and transported as a general chemical.

What help can we provide for you?

Please inform us of your performance, design, and manufacturing issues. We will utilize our expertise in silicon-based materials, coating knowledge, and processing experience to provide you with services.

Single component silicone

Thermal conductive materials

Silicone potting adhesive

gel

polyurethane

IGBT packaging adhesive

Three proof paint

Home >> Products >> Single component silicone... >> construction

Feature

Parameter

application

Usage method